TYPES OF WORK
Bathroom enquiries usually start from one of these situations. Some bathrooms just look tired. Some have cracked tiles or grout, and some have walls or floors that feel wrong underfoot or to the touch. Some owners want to keep the layout, and others aren’t sure whether a repair will do or the room needs a full renovation. Find the situation that’s closest to yours, then follow the link to the page that covers it in detail.
Melbourne and surrounding suburbs · 9am–6pm, seven days
FIVE SITUATIONS
Reference photo · Large floor tiles being set in mortar, with spacers across the unfinished floor
These aren’t fixed packages. They’re starting points. In every case, the work I propose depends on your existing bathroom conditions, the layout, the materials already in place and whether any specialist or approval requirements apply.
Faded tiles, a tired vanity and finishes that have aged badly are typical reasons a homeowner gets in touch. Sometimes the room underneath is sound, and the work is mostly about new surfaces and fittings. Sometimes the age of the finishes points to deterioration that has to be checked first. I look at both before suggesting a scope.
A cracked tile can be a one-off impact, or it can be a sign that the base beneath it is moving. Grout that keeps crumbling or discolouring often comes back to the same question. Before any new tiling, I check the substrate and plan proper surface preparation, because new tiles laid over a poor base tend to repeat the old problem.
Bubbling paint, a soft patch of wall near the shower, or floor tiles that sound hollow underfoot all deserve a closer look. These are the situations where I’m most careful about what I say before inspecting. If something points to a problem that needs further investigation, I’ll tell you so plainly rather than guess.
Keeping the shower, vanity and toilet in their current positions is often a sensible choice. Whether it suits your bathroom depends on how the room works for your household and on the condition of what’s already there. Moving things changes the scope, and it can bring in licensed plumbing or electrical work, which I coordinate with appropriately licensed specialists.
Sometimes a section of wall tiling, a floor or a vanity area can be repaired and the rest left alone. In other cases, the condition of the room means patching one part only delays the next problem. I’ll explain which way I’d lean and why, and I’ll also tell you where the answer can’t be settled until the old finishes come off.
Reference photo · Square ceramic tiles with light grout lines
WHAT EVERY SITUATION SHARES
Neat tiles can sit over a deteriorating substrate, and a stained wall can turn out to be only a surface issue. Whichever of the five situations sounds like yours, the final scope and cost can change once work begins. Concealed damage, substrate deterioration and layout changes are the usual reasons. That’s why I inspect the site before giving a firm quote, and why I prepare surfaces properly before anything new goes on.
I’m an independent renovation specialist with around 15 years of residential renovation experience, much of it in bathrooms, tiling and interior finishing. I don’t personally carry out licensed plumbing or electrical work, and I don’t offer architectural design or structural engineering. Where a bathroom needs any of these, I coordinate with appropriately licensed specialists and tell you clearly who does what.
COSTS
Bathroom Renovation Costs & Scope: why pricing is project-specific
QUESTIONS
Common Homeowner Questions: layout, repair or replace, tiles and floors
BEFORE YOU ENQUIRE
How to Photograph Your Bathroom for an Enquiry
OTHER WORK
Related Renovation Services: flooring, plastering, painting and laundry renovations
ALL GUIDES
Bathroom Renovation Guides